Non-destructive evaluation techniques and what they tell us about wood property variation L Schimleck, J Dahlen, LA Apiolaza, G Downes, G Emms, R Evans, ... Forests 10 (9), 728, 2019 | 111 | 2019 |
Review of the use of air-coupled ultrasonic technologies for nondestructive testing of wood and wood products Y Fang, L Lin, H Feng, Z Lu, GW Emms Computers and electronics in agriculture 137, 79-87, 2017 | 101 | 2017 |
The damping–modulus relationship in flax–carbon fibre hybrid composites MJ Le Guen, RH Newman, A Fernyhough, GW Emms, MP Staiger Composites Part B: Engineering 89, 27-33, 2016 | 93 | 2016 |
Fourier series solutions to the vibration of rectangular lightweight floor/ceiling structures H Chung, G Emms ACTA Acustica united with Acustica 94 (3), 401-409, 2008 | 42 | 2008 |
Overview and comparison of microwave noncontact wood measurement techniques M Bogosanovic, A Al Anbuky, GW Emms Journal of wood science 56, 357-365, 2010 | 27 | 2010 |
Influence of acoustic velocity, density, and knots on the stiffness grade outturn of radiata pine logs TG Jones, GW Emms Wood and fiber science, 1-9, 2010 | 25 | 2010 |
Improving the impact insulation of light timber floors G Emms, H Chung, K McGunnigle, G Dodd Acoustics 2006, 2006 | 23 | 2006 |
Microwave nondestructive testing of wood anisotropy and scatter M Bogosanovic, A Al-Anbuky, GW Emms IEEE Sensors Journal 13 (1), 306-313, 2012 | 18 | 2012 |
Application of longitudinal-wave time-of-flight sound speed measurement to Pinus radiata seedlings GW Emms, B Nanayakkara, JJ Harrington Canadian journal of forest research 43 (8), 750-756, 2013 | 17 | 2013 |
Control of sound transmission through an aperture using active sound absorption techniques: a theoretical investigation GW Emms, C Fox Applied Acoustics 62 (6), 735-747, 2001 | 17 | 2001 |
Maximising impact sound resistance of timber framed floor/ceiling systems H Chung, G Dodd, G Emms, K McGunnigle, G Schmid Final Report-FWPRDC Project PN04, 2005 | 16 | 2005 |
A novel technique for non-damaging measurement of sound speed in seedlings G Emms, B Nanayakkara, J Harrington European Journal of Forest Research 131, 1449-1459, 2012 | 15 | 2012 |
Vibration reduction in lightweight floor/ceiling systems with a sand-sawdust damping layer H Chung, G Emms, C Fox Acta Acustica united with Acustica 100 (4), 628-639, 2014 | 14 | 2014 |
Lightweight floor/ceiling systems with improved impact sound insulation H Chung, C Fox, G Dodd, G Emms Building Acoustics 17 (2), 129-141, 2010 | 12 | 2010 |
Non-destructive evaluation techniques and what they tell us about wood property variation. Forests, 10 (728) L Schimleck, J Dahlen, LA Apiolaza, G Downes, G Emms, R Evans, ... | 10 | 2019 |
Digital image correlation analysis of vertical strain for corrugated fiberboard box panel in compression CSL Kueh, K Dahm, G Emms, K Wade, JE Bronlund Packaging Technology and Science 32 (3), 133-141, 2019 | 9 | 2019 |
Microwave measurement of wood in principal directions M Bogosanovich, A Al Anbuky, G Emms SENSORS, 2009 IEEE, 252-256, 2009 | 7 | 2009 |
FWPRDC Project PN04. 2005 Maximising impact sound resistance of timber framed floor/ceiling systems G Emms, H Chung, G Dodd, G Schmid, K McGunnigle The Forest and Wood Products Research and Development Corporation …, 2006 | 7 | 2006 |
Non-destructive evaluation techniques and what they tell us about wood property variation. Forests, 10 (9): 728 L Schimleck, J Dahlen, LA Apiolaza, G Downes, G Emms, R Evans, ... | 6 | 2019 |
The effect of mounting conditions on low-frequency impact sound insulation of timber floors G Emms ICA, April, 2004 | 6 | 2004 |