| Comparison of Microstructure and Mechanical Properties of Scalmalloy® Produced by Selective Laser Melting and Laser Metal Deposition M Awd, J Tenkamp, M Hirtler, S Siddique, M Bambach, F Walther Materials 11 (1), 17, 2017 | 169 | 2017 |
| Criticality of porosity defects on the fatigue performance of wire+ arc additive manufactured titanium alloy R Biswal, X Zhang, AK Syed, M Awd, J Ding, F Walther, S Williams International Journal of Fatigue 122, 208-217, 2019 | 156 | 2019 |
| Interrupted fatigue testing with periodic tomography to monitor porosity defects in wire+ arc additive manufactured Ti-6Al-4V R Biswal, X Zhang, M Shamir, A Al Mamun, M Awd, F Walther, AK Syed Additive Manufacturing 28, 517-527, 2019 | 89 | 2019 |
| Very high-cycle fatigue properties and microstructural damage mechanisms of selective laser melted AlSi10Mg alloy M Awd, S Siddique, J Johannsen, C Emmelmann, F Walther International Journal of Fatigue 124, 55-69, 2019 | 67 | 2019 |
| Development of a stochastic approach for fatigue life prediction of AlSi12 alloy processed by selective laser melting S Siddique, M Awd, J Tenkamp, F Walther Engineering Failure Analysis 79, 34-50, 2017 | 55 | 2017 |
| High and very high cycle fatigue failure mechanisms in selective laser melted aluminum alloys S Siddique, M Awd, J Tenkamp, F Walther Journal of Materials Research 32 (23), 4296-4304, 2017 | 49 | 2017 |
| Microstructural characterization of the anisotropy and cyclic deformation behavior of selective laser melted AlSi10Mg structures M Awd, F Stern, A Kampmann, D Kotzem, J Tenkamp, F Walther Metals 8 (10), 825, 2018 | 43 | 2018 |
| Microstructure and mechanical properties of as-built and heat-treated electron beam melted Ti–6Al–4V A Syed, M Awd, F Walther, X Zhang Materials Science and Technology, 2019 | 32 | 2019 |
| Microstructural damage and fracture mechanisms of selective laser melted Al-Si alloys under fatigue loading M Awd, S Siddique, F Walther Theoretical and Applied Fracture Mechanics 106, 102483, 2020 | 29 | 2020 |
| Fracture–mechanical assessment of the effect of defects on the fatigue lifetime and limit in cast and additively manufactured aluminum–silicon alloys from HCF to VHCF regime J Tenkamp, M Awd, S Siddique, P Starke, F Walther Metals 10 (7), 943, 2020 | 28 | 2020 |
| Effect of microstructural heterogeneity on fatigue strength predicted by reinforcement machine learning M Awd, S Münstermann, F Walther Fatigue & Fracture of Engineering Materials & Structures 45 (11), 3267-3287, 2022 | 10 | 2022 |
| Towards deterministic computation of internal stresses in additively manufactured materials under fatigue loading: Part I M Awd, MF Labanie, K Moehring, A Fatemi, F Walther Materials 13 (10), 2318, 2020 | 9 | 2020 |
| Interrupted fatigue testing with periodic tomography to monitor porosity defects in wire+ arc additive manufactured Ti-6Al-4V. Addit. Manuf. 2019; 28: 517–27 R Biswal, X Zhang, M Shamir, A Al Mamun, M Awd, F Walther, AK Syed | 8 | |
| Improvement of fatigue strength in lightweight selective laser melted alloys by in-situ and ex-situ composition and heat treatment M Awd, J Johannsen, T Chan, M Merghany, C Emmelmann, F Walther TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings, 115-126, 2020 | 5 | 2020 |
| Mechanical and microstructural characterization of arc-welded Inconel 625 alloy D Kotzem, L Beermann, M Awd, F Walther Materials 12 (22), 3690, 2019 | 5 | 2019 |
| Machine learning of fatigue strength of hybrid and additively manufactured aluminum alloys in VHCF regime M Awd, F Walther Symposium on Advances in Accelerated Testing and Predictive Methods in Creep …, 2023 | 4 | 2023 |
| A review on the enhancement of failure mechanisms modeling in additively manufactured structures by machine learning M Awd, L Saeed, F Walther Engineering Failure Analysis, 107403, 2023 | 4 | 2023 |
| Comparative study of defect-based and plastic damage-based approaches for fatigue lifetime calculation of selective laser-melted AlSi12 M Awd, S Siddique, R Hajavifard, F Walther Proceedings of the 7th International Conference on Fracture Fatigue and Wear …, 2019 | 4 | 2019 |
| Simulation of cyclic deformation behavior of selective laser melted and hybrid-manufactured aluminum alloys using the phase-field method S Siddique, M Awd, T Wiegold, S Klinge, F Walther Applied Sciences 8 (10), 1948, 2018 | 4 | 2018 |
| A Review of Different Methods for Joining of Bi-Metallic Materials by Friction Welding M Harraz, M Awd, A Al-Sayyad | 4 | 2014 |
Frank WaltherProf. Dr.-Ing. | TU Dortmund University | Chair of Materials Test Engineering (WPT)Verified email at tu-dortmund.de
