Raul Payri
Raul Payri
Verified email at mot.upv.es - Homepage
TitleCited byYear
The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles
F Payri, V Bermúdez, R Payri, FJ Salvador
Fuel 83 (4-5), 419-431, 2004
4512004
Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics
R Payri, JM García, FJ Salvador, J Gimeno
Fuel 84 (5), 551-561, 2005
3892005
Diesel nozzle geometry influence on spray liquid-phase fuel penetration in evaporative conditions
R Payri, FJ Salvador, J Gimeno, LD Zapata
Fuel 87 (7), 1165-1176, 2008
1982008
Development and validation of a theoretical model for diesel spray penetration
JM Desantes, R Payri, FJ Salvador, A Gil
Fuel 85 (7-8), 910-917, 2006
1702006
New technique for determination of internal geometry of a diesel nozzle with the use of silicone methodology
V Macián, V Bermúdez, R Payri, J Gimeno
Experimental techniques 27 (2), 39-43, 2003
1632003
Effects of nozzle geometry on direct injection diesel engine combustion process
R Payri, FJ Salvador, J Gimeno, J De la Morena
Applied thermal engineering 29 (10), 2051-2060, 2009
1542009
A new methodology for correcting the signal cumulative phenomenon on injection rate measurements
R Payri, FJ Salvador, J Gimeno, G Bracho
Experimental techniques 32 (1), 46-49, 2008
1452008
Study of cavitation phenomena based on a technique for visualizing bubbles in a liquid pressurized chamber
R Payri, FJ Salvador, J Gimeno, J De la Morena
International Journal of Heat and Fluid Flow 30 (4), 768-777, 2009
1422009
Engine combustion network: comparison of spray development, vaporization, and combustion in different combustion vessels
M Bardi, R Payri, LMC Malbec, G Bruneaux, LM Pickett, J Manin, T Bazyn, ...
Atomization and Sprays 22 (10), 2012
1412012
Influence of cavitation phenomenon on primary break-up and spray behavior at stationary conditions
JM Desantes, R Payri, FJ Salvador, J De la Morena
Fuel 89 (10), 3033-3041, 2010
1392010
Engine combustion network (ECN): measurements of nozzle geometry and hydraulic behavior
AL Kastengren, FZ Tilocco, CF Powell, J Manin, LM Pickett, R Payri, ...
Atomization and Sprays 22 (12), 1011-1052, 2012
1382012
Engine Combustion Network (ECN): Characterization and comparison of boundary conditions for different combustion vessels
M Meijer, B Somers, J Johnson, J Naber, SY Lee, LMC Malbec, ...
Atomization and Sprays 22 (9), 2012
1342012
Analysis of the influence of diesel nozzle geometry in the injection rate characteristic
J Benajes, JV Pastor, R Payri, AH Plazas
J. Fluids Eng. 126 (1), 63-71, 2004
1272004
Measurements of spray momentum for the study of cavitation in diesel injection nozzles
JM Desantes, R Payri, FJ Salvador, J Gimeno
SAE Technical Paper, 2003
1242003
Measurements of Spray Momentum for the Study of Cavitation in Diesel Injection Nozzles
JM Desantes, R Payri, FJ Salvador, J Gimeno
SAE SP, 77-86, 2003
1242003
A contribution to the understanding of cavitation effects in Diesel injector nozzles through a combined experimental and computational investigation
F Payri, R Payri, FJ Salvador, J Martínez-López
Computers & Fluids 58, 88-101, 2012
1122012
Fuel temperature influence on diesel sprays in inert and reacting conditions
R Payri, JM García-Oliver, M Bardi, J Manin
Applied Thermal Engineering 35, 185-195, 2012
1102012
The effect of temperature and pressure on thermodynamic properties of diesel and biodiesel fuels
R Payri, FJ Salvador, J Gimeno, G Bracho
Fuel 90 (3), 1172-1180, 2011
1032011
Engine combustion network
LM Pickett, G Bruneaux, R Payri
Sandia National Laboratories, Livermore, CA, http://www. ca. sandia. gov/ecn, 2014
922014
Experimental characterization of diesel ignition and lift-off length using a single-hole ECN injector
J Benajes, R Payri, M Bardi, P Martí-Aldaraví
Applied thermal engineering 58 (1-2), 554-563, 2013
912013
The system can't perform the operation now. Try again later.
Articles 1–20