| A computational investigation on the influence of the use of elliptical orifices on the inner nozzle flow and cavitation development in diesel injector nozzles S Molina, FJ Salvador, M Carreres, D Jaramillo Energy Conversion and Management 79, 114-127, 2014 | 99 | 2014 |
| Using one-dimensional modeling to analyze the influence of the use of biodiesels on the dynamic behavior of solenoid-operated injectors in common rail systems: Results of the … FJ Salvador, J Gimeno, J De la Morena, M Carreres Energy Conversion and Management 54 (1), 122-132, 2012 | 75 | 2012 |
| Engine combustion network: Influence of the gas properties on the spray penetration and spreading angle F Payri, R Payri, M Bardi, M Carreres Experimental Thermal and Fluid Science 53, 236-243, 2014 | 74 | 2014 |
| Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part II: 1D model development, validation and analysis R Payri, FJ Salvador, M Carreres, J De la Morena Energy Conversion and Management 114, 376-391, 2016 | 59 | 2016 |
| Comparison of microsac and VCO diesel injector nozzles in terms of internal nozzle flow characteristics FJ Salvador, M Carreres, D Jaramillo, J Martínez-López Energy Conversion and Management 103, 284-299, 2015 | 59 | 2015 |
| Complete modelling of a piezo actuator last-generation injector for diesel injection systems FJ Salvador, AH Plazas, J Gimeno, M Carreres International Journal of Engine Research 15 (1), 3-19, 2014 | 53 | 2014 |
| Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part I: Experimental mass flow rate measurements and discussion FJ Salvador, J Gimeno, M Carreres, M Crialesi-Esposito Energy Conversion and Management 114, 364-375, 2016 | 50 | 2016 |
| Large-eddy simulation analysis of the influence of the needle lift on the cavitation in diesel injector nozzles JM Desantes, FJ Salvador, M Carreres, J Martínez-López Proceedings of the Institution of Mechanical Engineers, Part D: Journal of …, 2015 | 43 | 2015 |
| Analysis of the combined effect of hydrogrinding process and inclination angle on hydraulic performance of diesel injection nozzles FJ Salvador, M Carreres, D Jaramillo, J Martínez-López Energy Conversion and Management 105, 1352-1365, 2015 | 36 | 2015 |
| An investigation on the dynamic behaviour at different temperatures of a solenoid operated common-rail ballistic injector by means of a one-dimensional model FJ Salvador, P Martí-Aldaraví, M Carreres, D Jaramillo SAE Technical Paper, 2014 | 28 | 2014 |
| Experimental characterization of the thermodynamic properties of diesel fuels over a wide range of pressures and temperatures JM Desantes, FJ Salvador, M Carreres, D Jaramillo SAE International Journal of Fuels and Lubricants 8 (1), 190-199, 2015 | 27 | 2015 |
| Modal decomposition of the unsteady non-reactive flow field in a swirl-stabilized combustor operated by a Lean Premixed injection system FJ Salvador, M Carreres, J García-Tíscar, M Belmar-Gil Aerospace Science and Technology 112, 106622, 2021 | 21 | 2021 |
| Effect of the nozzle holder on injected fuel temperature for experimental test rigs and its influence on diesel sprays J Gimeno, P Martí-Aldaraví, M Carreres, JE Peraza International Journal of Engine Research 19 (3), 374-389, 2018 | 21 | 2018 |
| Characterization and prediction of the discharge coefficient of non-cavitating diesel injection nozzles JM Desantes, JJ López, M Carreres, D López-Pintor Fuel 184, 371-381, 2016 | 21 | 2016 |
| Thermal effects on the diesel injector performance through adiabatic 1D modelling. Part II: Model validation, results of the simulations and discussion R Payri, FJ Salvador, M Carreres, M Belmar-Gil Fuel 260, 115663, 2020 | 17 | 2020 |
| Thermal effects on the diesel injector performance through adiabatic 1D modelling. Part I: Model description and assessment of the adiabatic flow hypothesis FJ Salvador, J Gimeno, J Martín, M Carreres Fuel 260, 116348, 2020 | 17 | 2020 |
| Computational assessment of temperature variations through calibrated orifices subjected to high pressure drops: Application to diesel injection nozzles FJ Salvador, M Carreres, J De la Morena, E Martínez-Miracle Energy Conversion and Management 171, 438-451, 2018 | 16 | 2018 |
| Experimental assessment of the fuel heating and the validity of the assumption of adiabatic flow through the internal orifices of a diesel injector FJ Salvador, J Gimeno, M Carreres, M Crialesi-Esposito Fuel 188, 442-451, 2017 | 15 | 2017 |
| Determination of critical operating and geometrical parameters in diesel injectors through one dimensional modelling, design of experiments and an analysis of variance FJ Salvador, M Carreres, M Crialesi-Esposito, AH Plazas Proceedings of the Institution of Mechanical Engineers, Part D: Journal of …, 2018 | 14 | 2018 |
| Spectral analysis and modelling of the spray liquid injection in a Lean Direct Injection (LDI) gas turbine combustor through Eulerian-Lagrangian Large Eddy Simulations A Broatch, M Carreres, J García-Tíscar, M Belmar-Gil Aerospace Science and Technology 118, 106992, 2021 | 13 | 2021 |
